Floor Restoration Amersham

Renovations & Sanding covering a wide span of the surrounding area. H.C Bell have a lot of experience and training in floor restoration & renovation. Over the years we have built up a high reputation and have the skills to match this. We make sure all of our customers are 100% happy with the job before we sign it off. Floor restoration or renovation can be a great way to get your old floor's looking brand new. There are several processes required when renovating a floor, that will prove to complete the job to a really high standard. We offer a friendly service and provide the highest customer service. Our team have completed work in Amersham, Beaconsfield and a wide span of the surrounding area.

Get in contact with us today to find out how we can help you. Don't forget about the range of other flooring services we offer. Our team can complete anything from floor sanding, finishing, staining and much more. Get in contact with us today to find out more about what we can offer you.

Our flooring renovations processes include


A wood floor would normally take several passes with up to four grades of abrasive paper until we are happy with the finish. This process is dependant on the type of wood being sanded and the degree it has been soiled.


Most of the time your old floor will look best finished displaying its natural colour. But there are times it can be improved or changed to suit your taste with the use of wood dye prior to applying the floor finish. We have various different coloured dyes and can often carry out little sample patches on your floor to help you choose while work is in progress.


We have some professional flooring finishes to apply to the floor next. Our varnish is water-based, which gives a clear finish and enhances the look of the floor without adding any colour. Our oil is also clear, but will provide a slightly richer tone to the finished wood.


We need to apply 3 coats of varnish or 2 coats of oil at this stage, usually at daily intervals. Once the floors are sanded and cleaned we can apply the first layer of finish. After the coat has dried, and if it is water-based, we lightly abrade the surface to cut back the raised wood grain and then apply a second layer of finish. This process is repeated until the desired effect is obtained.